How To Clean Bath Toys In Washing Machine

Our children are prone to health problems.

This is because their immune system has not fully matured and developed yet.

Hence, they can be weak and vulnerable to bacteria.

This is why protecting them should be our main priority.

Ensuring that their environment is clean is a must.

This is so they can freely run around without you worrying about them.

Moreover, regular sanitation and cleaning of the home must be done.

The same goes for their toys.

Bath toys, for example, are one of the most susceptible items to bacteria.

As such, it is important that they are cleaned every once in a while.

Good thing though, there are ways on how to clean bath toys with mold inside.

There is also a way on how to clean tub for baby.

Or, you can learn a new way on how to clean foam bath toys.

Are you looking for ways on how to clean foam bath letters?

Or are you curious as to how to clean bath toys after poop?

Don’t worry! We got your back.

All of these can be answered in a single article.

For instructions on how to clean bath toys in washing machine, read on!

Using Washing Machine

When you are doing the laundry, you can simply throw in the bath toys too.

It’s like killing two birds with one stone.

All you have to do is to put the bath toys in a mesh laundry bag.

Then, run the washing machine in a cool or warm cycle.

Just remember not to use the hot cycle. This one can melt the toys.

It’s easy, right? Simply use a strong detergent that can remove bacteria from the clothes.

This way, the bath toys can also be free of dirt and bacteria.

Thus, making it safe for the kids to play with.

Using Vinegar

Bleach is not the only solution out there.

Vinegar is taken to be a natural cleaner as well as a disinfectant.

Hence, it is a great alternative to bleach.

Simply mix one gallon of water with one-half cup of water.

Then, have the toys soaked for approximately one hour.

Once the hour is up, scrub the mold loose and leave them to dry.

Rinse the toys more if the vinegar smell does not waver before placing them back.

Boiling

It is best to make sure that your child is safe by means of boiling the toys.

Simply submerge them in hot water.

Then, squeeze out any dirt from them by using some tongs.

Have them cool off and dried thoroughly.

Using the Dishwasher

Sometimes, all you need to do is to stick the bath toys into the dishwasher.

This way, the bath toys can be sanitized by killing off gunk and mold.

It does this both inside and out too.

While it seems to be quite a simple method, it does get the job done.

Simply squeeze water out of the bath before you wash them.

This will allow the dishwasher to get access to the inside.

Using Disinfectant Wipes

Disinfectant wipes in the bathroom are necessary.

This is to ensure that you have a cleaning assistant for routine disinfecting maintenance.

After you use the toys during bath time, just squeeze out the water.

Then, wipe down the outside of the bath toy and rinse them.

Using Clorox

First, you must wear goggles, plastic gloves, and goggles first.

They are necessary for when you are working with bleach.

To disinfect the toys, simply add one-half cup of Clorox per gallon of water in the tub.

This is the bleach to water ratio for cleaning toys.

Then, have the toys soaked for about ten minutes.

You can include your bath mats, rinsing cups, toy baskets, and more.

Then, turn on the exhaust fan in the bathroom and then have the windows opened.

Leave the door open as well.

The bleach solution may irritate the nose and the throat.

Hence, it is best to leave the area first.

The bath toys which have holes should be filled with Clorox water as well.

This will make sure that the mold inside bath toys is eradicated as well.

With this, cleaning bath toys using Clorox bleach is made easy!

How to Prevent Mold

Prevention is better than cure. Hence, they should be prevented from forming before you let your child play with the toys.

Simply create a food and healthy environment for the storage of the bath toys.

You can invest in a rack or a tray.

This will allow the draining of the water from the bath toys.

Moreover, you can leave them close to an open window so it can have appropriate ventilation. You can also use fans and vents to let out the remaining steam for the bath.

If the method does not get rid of the gunk or the mold, throw it out.