How To Clean Rusty Tools With Coke (Incl. Helpful Tips!)

How To Clean Rusty Tools With Coke

How To Clean Rusty Tools With Coke (Incl. Helpful Tips!)

Everyone has likely come across various tools that have gone rusty before.

No matter where you are or what type of person you are, this is only natural.

A lot of jobs, as well as industries, use hand tools. As such, they can go rusty over time with frequent use.

Hand tools are versatile and interchangeable. Hence, they can easily aid people in completing various tasks.

Thus, due to frequent use and storage, elements might stick themselves in them.

Tools can get cold whenever they are left in a cold and enclosed box.

As such, it causes the moisture to cling to them. Thus, resulting in rust.

It’s a good thing though, as there are ways on how to clean rusty tools with vinegar.

You can also coke, as proven by coca-cola rust removal mythbusters.

Did you know that removing rust with coke and aluminum foil is also possible?

You can also remove rust from tools baking soda.

How to clean rust tools with coke? How long do I soak rusty tools in coke?

Read on to find out!

Removing Rust with Coke

For how to clean rusty tools with coke, you will need the following:

  • Large bowl or container
  • 1L of Coca-Cola
  • Cloths or rags

This method is a very simple one.

All you need is to pour enough amount of Coke into the bowl or container.

Then, soak the rusty tools in the solution. Leave them for about 24 hours or longer.

It will depend on the level of corrosion of the tools.

Hence, make sure that they are completely covered by Coca-Cola.

Tools that are severely rusted will need more time.

After that, remove the tools from the solution.

Make sure that rust is no longer there.

Coke is an effective cleaner as it has phosphoric acid.

This acid can dissolve iron and iron oxide, or rust.

Yet, it can make the tools more corroded if left in the acid for too long.

This is because it can melt iron oxide very quickly.

A few days should solve the problem.

Removing Rust with Vinegar

Rust can come off by means of simply soaking the tools in vinegar.

However, you need to make sure that it is rinsed carefully.

If not, vinegar may cause them to rust again.

Moreover, after you have rinsed and dried the tools, spray them with WD-40.

This is a substance that is widely used for preventing rust on metals.

You will need the following materials for this:

  • Dish detergent
  • Fine sandpaper
  • Steel wool
  • Kerosene (optional)

To begin, rinse the tools in soapy water.

This will remove dust, dirt, and grease from them.

Then, make sure that they are properly dried and rinsed.

Scrub the tools using the steel wool remove thrust.

Then, use fine sandpaper in order to smooth out the grooves.

These grooves are caused by the coarse grit if you are using one instead of steel wool.

If the tools are severely rusted, you can use kerosene.

This will act as a lubricant.

However, if the rust remains, try another way, such as Coke.

Removing Rust with Lemon Juice and Salt

This is a natural cleaning method that is widely used, yet unpopular.

For this, simply gather the following materials:

  • Lemon juice
  • Salt
  • Steel wool or sandpaper
  • Container
  • Cloth or rag

To start, simply combine lemon juice and salt in a container.

Then, rub the solution on the tools using steel wool or sandpaper.

The salt will serve as a corrosive or an abrasive.

On the other hand, the acid in the lemon breaks through the corrosion.

For tools that have been severely rusted, leave the solution on for some time.

A good five minutes or so should do the trick.

Once the solution has been rinsed, wipe it down using a dry cloth.

Removing Rust with Baking Soda and Vinegar

This method is another natural and popular cleaning solution.

You will need the following materials for this:

  • Water
  • Vinegar
  • Baking soda
  • Toothbrush
  • Paper towels
  • Sponge
  • Hair dryer (optional)
  • Two buckets
  • Coconut oil (optional)

The first step is to fill the bucket with vinegar.

This is where you will submerge the tools and have them completely covered.

Then, place the rusty tools in the solution.

Leave them for about three to five minutes.

Then, remove the tools and use a toothbrush to scrub the rust away.

After that, simply fill the other bucket with baking soda and water.

One-third of baking soda and two-thirds of water must be added.

Place the tools that have been scrubbed in the solution afterward. Then, rinse the tools with water and dry them up using paper towels.

You can use a hairdryer for areas or spaces that are hard to reach.

Finally, apply coconut oil in order to make sure that the tools are protected from rust.

Find more useful guides and how to’s on, your everyday cleaning guide.

5/5 - (2 votes)

Share this post