How To Clean Airpods Microphone (Incl. Helpful Tips)

Do you always share your AirPods with your friend?

Sharing earbuds means sharing germs and earwax too, and you know it’s disgusting.

Let’s talk about microorganisms and excessive earwax development on your ear buds.

If you notice any dirt and earwax build-up on your AirPods, you should clean them right away.

Accumulation of earwax and bacteria could lead to health risks, and you may end up being ill.

One indication that there’s a grime development in AirPods is sound reduction.

If you notice that the sound is getting quieter, it means there’s a blockage on the large opening.

To solve that issue, follow the methods below on how to clean AirPods, AirPods Case, and microphone.

How To Clean Airpods Case

If you always put your AirPods case in your pouch or handbag, expect to see dirt and grime build-up on it.

Cleaning your case can be done by simple methods.

Strictly follow the instructions below to clean your AirPod case.

1. First, open up your case and remove your AirPods.
2. Clean first the interior component of the case.
3. Get a fuzzy q-tip to eliminate the grime, earwax, and dirt on grooves and the upper lid of your AirPods.
4. Dirt and grime could also go down into the stem part. However, it’s rare to find any grime in there. If it does, get your swab and try to reach the well.
5. You should do push and pull movements to remove the debris in the well. When you reach the well, try your best not to tap the charging contacts or push it deeper.
6. Next, damp the q-tip with alcohol to further clean the upper part of your AirPods case.
7. Once you’re done cleaning the interior part, close the case and start cleaning the exterior side.
8. Get a microfiber cloth to wipe the exterior portion of your case. If you can’t remove the dirt from it, damp the microfiber cloth in the alcohol to fully eliminate the grime.

If the charging port of your AirPod is filthy, you can use this same process to clean it.

• Users found this helpful: Cleaning Kit for Airpods, Earbuds, Cleaning Pen with Brush

How To Clean Airpods With Hydrogen Peroxide

Hydrogen peroxide is known for its effectiveness in cleaning.

It can remove any grime build-up and could melt earwax in the mesh.

If you want to know how to clean your AirPods with hydrogen peroxide, follow the instructions below.

Before you begin cleaning, make sure that you have a paperclip, hydrogen peroxide, wet wipes, cotton swab, hair dryer, and of course, your AirPods.

1. Get a paper clip and unfold it.
2. Use it to scrape the earwax build-up on the openings of your AirPods. Remember to scrub that part gently and don’t push the speaker too strongly. The only thing you should do is remove the visible gunk accumulation around your AirPods border.
3. Place your earbuds on a plane surface, then remove the loose grime. Make sure that your AirPods are facing down so that the earwax and germ go down.
4. Damp a cotton swab with hydrogen peroxide. This solution will soften the excess earwax on the large opening so that you can remove them easily later.
5. Next, use a hairdryer to melt the grime.
6. Exhale air through the large opening of your AirPods. After you blow all the dirt and grimes, use wet wipes to clean the outer part.

Airpods Microphone Not Working

If your AirPods are always malfunctioning and causing headaches, don’t worry.

You’re in the right place to look for solutions.

Here’s what you need to do if your AirPods microphone stops working.

If you’re going to diagnose your AirPods, make sure that the charging case is completely charged.
Put your AirPods inside your charging case and charge them for thirty seconds.
Put the charging case beside your Ipad or iPhone and test if it’s connecting.
Bring out the AirPods from the charging case and put them in your ears.
Play some music to check if both AirPods are working.
If the AirPods are still not working, you need to reset them.

How To Clean Airpods Pro Microphone

If you notice some sort of stains in your AirPods Pro microphone, clean them before putting them into your ears again.

If you want to know how to clean the speaker, follow the step-by-step instructions below to clean your AirPods speakers.

1. Get a soft, dry microfiber cloth and damp it with water. Start wiping down your AirPods to remove the dirt and dust.
2. Let them dry first before putting them inside the AirPods case.
3. Be careful not to drop any water in the openings.
4. Next, get a dry q-tip and swab the speaker mesh and microphone.
5. Remember not to use any abrasive materials or pointed objects when cleaning your AirPods.

There are many available ways to clean your AirPods.

So, if you want to avoid too much earwax production on your AirPods, make sure to clean them regularly.

Maintaining your AirPods cleanliness will prevent you from getting sick.

If you notice any gross earwax, don’t wait for bacteria to grow and clean your device immediately.

• Users found this helpful: Cleaning Kit for Airpods, Earbuds, Cleaning Pen with Brush

Find more useful guides and how to’s on MaidFeed.com, your everyday cleaning guide.